Lucent Technologies DDM-2000 OC-3 User Manual

SET-STATE-T3 2of1Page SET-STATE-T3
NAME
StatePortT3Setset-state-t3:
FORMATINPUT
set-state-t3: Address :ps= PrimaryState ;
DESCRIPTION
usediscommandThisports.DS3moreoroneofstatethesetscommandThis
port.specifiedafromfailuressignaltoduealarmtheoffandonturnto
are:parametersinputThe
Address port(s).DS3theidentifiesAddress
TMUX):BBG20BBG4B,(BBG4,AddressesPortDS3Valid
{a,b,c,all}
(BBG19):AddressesPortDS3Valid {a,b,c}-{1-2,all}all,
ps followingtheofonehavemaywhichstateporttheisPrimaryState
values:
auto theatsignalgoodformonitoredbetostateSet
port.specified
nmon not-alarmed.tostatememorySet
NOTE:
theinisportaIf nmon thetoreturnedbemustitstate, auto usingstate,
becanportthatwithassociatedpackscircuitanybeforecommand,this
thebylistequipmentthefromremoved update command.
ofstateportaIf nmon displayed:bewillmessagefollowingtheentered,is
)s(troP*/ sserdda /*etatssihtnidemralaebtonlliw
11-448 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English