Lucent Technologies DDM-2000 OC-3 User Manual

SET-VT1 4of2Page SET-VT1
"0"tosetbecannotparametertheand-6,isvaluedefaultThe
longasoperationalalwaysisfunctiondegradesignalThe(disabled).
used.arefunctionalitythesupportthattypespackcircuitOLIUas
nsa provisionedtheisItreleases.ringOC-3inavailableisparameterThis
thehasandAISpathVTaffectingnon-servicetheoflevelalarm
values:following
mn (default)alarmMinor
nr reported.notandalarmedNot
sa AISpathVTaffectingservicetheoflevelalarmprovisionedtheisThis
values:followingthehasand
mj channels)ringfor(defaultalarmMajor
mn default)only,channels(non-ringalarmMinor
na reportedbutalarmed,Not
nr only)channels(non-ringreportednotandalarmednot
valueanyisusedaddresstheandenteredisparameterdegradesignaltheIf
thanother all message:followingthewithdeniedbewillcommandthe
siretemarapedargedlangisehtrofsserddadilavylnoehT*/ .}lla{
retneretemarapedargedlangisehttesoT
:1tv-tes
lla =rgd: eulav /*;
cross-connectionVToneleastatthatrequiresparametersAIStheprovisionTo
theandexecutenotwillcommandtheorrangeaddressspecifiedtheinexist
displayed.bewillmessagefollowing
SVNS
/*etatSdilaVnitoN,sutatS*/
/*.detcennoc-ssorcylreporptonsihtapdeificepsehT*/
11-482 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English