Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-ALM 31of7Page RTRV-ALM
DescriptionReportDescriptionReport
(Contd)DescriptionsRTRV-ALM11-3.Table
MeaningDescription
failedCPDS1 CP.DS1specifiedtheoffailureequipmentInternal
loopbackDS1 theonactiveisfiber)opticalthe(towardloopbackA
theSeeport.T1specified opr-lpbk-t1 and
rls-lpbk-t1 commands.
fiber)(toloopbackDS1 theonactiveisfiber)opticalthe(towardloopbackA
theSeeport.T1specified opr-lpbk-t1 and
rls-lpbk-t1 commands.
DSX)(toloopbackDS1 specifiedtheonactiveisDSX)the(towardloopbackA
theSeeport.T1 opr-lpbk-t1 and
rls-lpbk-t1 commands.
IPtesttrmsnDS1 signaltestinternaltheusingtesttransmissionA
T1specifiedtheonprogressinismonitorandgenerator
theSeeport. test-trmsn-t1 command.
failedCPDS1PM CP.DS1PMspecifiedtheoffailureequipmentInternal
failedCPDS3 _CP.DS3specifiedtheoffailureequipmentInternal
loopbackDS3 fiber)opticalthe(towardloopbackA!T{
port.T3specifiedtheonactiveis
theSee opr-lpbk-t3 and
rls-lpbk-t3 commands.
Fiber)(toloopbackDS3 theonactiveisfiber)opticalthe(towardloopbackA
port.T3specified
theSee opr-lpbk-t3 and rls-lpbk-t3
commands.
DSX)(toloopbackDS3 specifiedtheonactiveisDSX)the(towardloopbackA
port.T3
theSee opr-lpbk-t3 and rls-lpbk-t3
commands.
OC-3DDM-2000 2000February2Issue 11-539

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English