Lucent Technologies DDM-2000 OC-3 User Manual

363-206-285 System Turnup/Circuit Order: IXL-001
Issue 3, June 2001 Page 27 of 44
DDM-2000 OC-3 MULTIPLEXER
Figure 18 – DDM-2000/FT-2000 Large Network Configurations — OC-3/IS-3
Optical Span Extension Between DDM-2000 OC-12 Ring and FT-2000 OC-48
Establish OC-3 Optical Span Extension Between
FT-2000 and DDM-2000 OC-12 Ring
See Figure 19
Establish Initial End-to-End Service
as required
[363-206-285 User/Service
Manual, Volume 2 (TOP)]:
DS1 [System Turnup - NTP-004]
DS3 [System Turnup - NTP-005]
EC-1 [System Turnup - NTP-034]
HDSL [System Turnup - NTP-003]
LAN [System Turnup - NTP-028]
T1 [System Turnup - NTP-033]
Establish OC-3 Optical Span
Extension - Extension Added Between
FT-2000 and DDM-2000 OC-12 Ring
[363-206-285 User/Service Manual,
Volume 2 (TOP)]:
System Turnup - NTP-049
Note: Assumes DDM-2000 OC-12
ring and FT-2000 are already
established

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English