Lucent Technologies DDM-2000 OC-3 User Manual

NTP-029: Circuit Order 363-206-285
Page 18 of 22 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
DO ITEMS BELOW IN ORDER LISTED. . . . . FOR DETAILS, GO TO
24.
NOTE:
Wait until FAULT LED on MAIN OLIU extinguishes before
attempting switch.
At Node 1, use the switch-line:main:pri=manual
command to switch service to the service line (main-1 OLIU
active-rx)atNode1.(SeeFigure14.)
Figure 14 – DDM-2000 OC-3 Point-to-Point to Ring Upgrade

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English