363-206-285 Circuit Order: NTP-039
Issue 2, February 2000 Page 25 of 32
DDM-2000 OC-3 MULTIPLEXER
DO ITEMS BELOW IN ORDER LISTED . . . . .FOR DETAILS, GO TO
Figure 19 – DDM-2000 OC-3 Drop or Add/Drop Network to Ring Upgrade
DLP-53235. At last Node 4 (RTn), locally download TARP Release 13 or later
software.
36.
NOTE:
Service interruption will occur if the following step is not
performed for all timeslots that terminate at other nodes in
theringnetwork.
At last Node 4 (RTn) use the ent-crs-vt1: command or
ent-crs-sts1: command to set up all main-to-main
pass-through cross-connections associated with all remaining
STS/VT timeslots that are terminated on other nodes of the ring.
DLP-532
To Next Page
Loading...
Need help?
General
