Lucent Technologies DDM-2000 OC-3 User Manual

DLP-525: Detailed Level Procedure 363-206-285
Page 9 of 10 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
27. Execute the apply command at the shelf to receive the software. Software
download may take up to 2 minutes.
Response: The addressed IMA LAN resets after the software is
installed.
The IMA LAN FAULT LED goes on for the duration of the
reset and goes off after the reset.
28. Did apply command successfully complete?
If YES, then STOP. YOU HAVE COMPLETED THIS PROCEDURE.
If NO, then call your local RTAC or CTS.

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English