Lucent Technologies DDM-2000 OC-3 User Manual

363-206-285 Detailed Level Procedure: DLP-527
Issue 2, February 2000 Page 3 of 4
DDM-2000 OC-3 MULTIPLEXER
21. Clean fiber-end face and sides of connector with lint-free, optical quality tissue
moistened with isopropyl alcohol.
22. Carefully wipe fiber-end face and sides of connector again with clean, dry,
lint-free optical quality tissue.
23. Blow any lint or dust from fiber-end face and sides of connector using canned
air at least 3 inches (8 cm) from connector.
24. STOP. YOU HAVE COMPLETED THIS PROCEDURE.

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English