DLP-533: Detailed Level Procedure 363-206-285
Page 3 of 6 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
Rebooting the PC
Occasionally, you may have to reboot the PC. There are three ways to accomplish
this:
• Power ON/OFF switch — If the PC is OFF, you should set the ON/OFF switch to
the ON position. If the PC is already ON, it is preferable to reset it using one of
the following two methods:
• RESET button — Not all PCs have a RESET button, but if yours does, it provides
an easy way to reset the PC. Alternatively, the following method may work.
• Hold down the Ctrl, Alt and Delete keys all at the same time.
If RESET or Ctrl, Alt, and Delete keys are not effective, turn OFF the PC, wait a few
seconds, and turn it back ON. Rebooting the PC clears all data you had in memory. If
the time of day clock is not indicating the current time and date, set the time of day
clock.
To Next Page
Loading...