363-206-285
Operations Interfaces
6-2 Issue 3 June 2001
Craft Interface Terminals (CIT) 6
The DDM-2000 OC-3 Multiplexer supports three types of access mechanisms
through the CIT that can be supported simultaneously.
■ Local access
■ Remote access via a modem port
■ Remote access via the data communications channel (DCC).
A CIT is recommended for installation, maintenance, and administrative activities.
The CIT can be either an RS-232-D terminal or personal computer (PC). An
MS-DOS
*
PC is required for software download and to run CPro-2000 software.
Any PC may function as a CIT when loaded with a commercially-available
terminal emulation program. See Section 10, "Technical Specifications," for PC
specifications.
Table 6-1 lists some of the terminals and PCs that can be used with the CIT
interface. Note that some terminals and PCs may no longer be commercially
available but can still be used.
* Registered trademark of Microsoft Corporation.
To Next Page
Loading...