363-206-285
Administration and Provisioning
Issue 3 June 2001
8-33
STS1E
Two-Way
VT
9.0 9.0 9.0 13
1
Two-Way
STS
13.0, 11.1 13.0,
11.1
13.0,
11.1
Add/Drop
STS
13.0, 11.1 11.0
Add/Drop
VT
13.0, 11.1 11.0
MXRVO
Two-Way
VT
9.0 9.0
Add/Drop
STS
13.0, 11.1
§‡‡
11.0
§§
Add/Drop
VT
13.0, 11.1
§‡‡
11.0
§§
TMUX
Two-Way
VT
13.0, 11.1 13.0,
11.1
Add/Drop
STS
13.0, 11.1
§
13.0, 11.1
Add/Drop
VT
13.0, 11.1
§
13.0, 11.1
*
A 22-type OLIU in a function unit is in “linear” (unprotected or 1+1 line protected), not a ring configuration.
†
This table refers to only “low-speed” STS-1 interfaces.
‡
This entry represents the hairpin local drop cross-connection between a channel on an OC-1 ring terminating
on a pair of 26G2-U OLIUs and a DS1 port in the low-speed group associated with the 26G2-U OLIUs. The
MXRVO functionality on the 26G2-U OLIUs is used. Note that it is NOT possible to connect between a channe
on an OC-1 ring terminating on a pair of 26G2-U OLIUs and a 26G2-U/DS1 combination in a different function
unit.
§
MXRVO functionality within the 26G2-U OLIU is NOT used. Rather, a separate pair of MXRVOs in a different
FN group are used.
¶
Cross-connections from one OC-1 ring to a different OC-1 ring in a different function unit.
**
One of the pair of function unit slots will be empty.
††
Cross-connections from one OC-1 ring to a different OC-1 ring in the same function unit.
‡‡
The mixing of 0x1, Pass-Through, and local Add/Drop cross-connects is supported beginning with R13.0.
§§
The mixing of 0x1, Pass-Through, and local Add/Drop cross-connects is supported beginning with R11.0.
From
FUNCTION UNIT
To
FUNCTION UNIT
Circuit
Pack
Cross-Connect
Type 22-type
*
26G2-U 27G2-U DS3 STS1E
†
MXRVO TM
To Next Page
Loading...
Need help?
General
