EasyManua.ls Logo

Lucent Technologies DDM-2000 OC-3 - Page 608

Lucent Technologies DDM-2000 OC-3
2536 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
363-206-285
Technical Specifications
10-20 Issue 3 June 2001
Long Reach OC-12 Interface (24G-U) 10
Optical Specification
The distributed feedback laser supplies a NRZ-coded signal. For direct
optical loopbacks, at least 15 dB of optical attenuation is needed for the
24G-U.
The 24G-U OLIU long reach OC-12 interface supports span lengths up to
51 km, assuming 0.45 dB/km single-mode fiber (including splices) and the
span engineering rules outlined in Table 10-11. Transmit and receive
powers are referenced to points S and R as shown in Figure 10-2.
Table 10-10 and Table 10-11 provide detailed specifications and link
budget information for the 24G-U OLIU. Note that the 24G-U OLIU is not
specified to operate over multimode fiber.
Alarm Thresholding
The following parameters are monitored at the OC-12 interface.
Loss of signal (LOS)
Loss of frame (LOF)
Loss of pointer (LOP)
—LineAIS
B2 thresholding signal fail
B2 thresholding signal degrade. (B2 signal degrade thresholds are
user settable in the range from 10
-5
to 10
-9
BER.)
Performance Monitoring (see Table 10-23)
Section SEFS
Line parameter B2.
STS pointer justifications (Release 11.0 and later).

Table of Contents

Other manuals for Lucent Technologies DDM-2000 OC-3

Related product manuals