Lucent Technologies DDM-2000 OC-3 User Manual

363-206-285
Technical Specifications
Issue 3 June 2001
10-61
CPro-2000 Graphical User Interface and
Provisioning Tool 10
The CPro-2000 Graphical User Interface and Provisioning Tool is a Microsoft
*
Windows based user interface that can optionally be used with the DDM-2000
OC-3 Multiplexer. The tool simplifies and mechanizes administration,
maintenance, and provisioning operations. CPro-2000 supports DDM-2000 OC-3
Multiplexers, DDM-2000 OC-12 Multiplexers, and FT-2000 OC-48 Lightwave
Systems. A minimum platform configuration is:
■ 486 DX IBM
†
compatible desktop or laptop PC
■ Disk drive — one 1.44 Megabyte (3.5 inch)
■ Hard disk with at least 40 Megabytes of available space
■ 16 Megabyte RAM
■ MS-DOS operating system version 5.0 or later
■ Windows NT or Windows 95, Windows 98
■ Serial port (EIA-232-D) — configured as COM1 or COM2
■ Mouse
■ VGA color monitor.
CPro-2000 has been tested with AT&T,
NCR , IBM , NEC
‡
, and
Gateway -2000
§
personal computers.
* Microsoft is a registered trademark and Windows is a trademark of Microsoft Corporation.
† IBM is a registered trademark of International Business Machines Corporation.
‡ NEC is a registered trademark of NEC Corporation.
§ Gateway 2000 is a trademark of Gateway 2000, Inc.

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English