Lucent Technologies DDM-2000 OC-3 User Manual

CNVT-CRS 5of2Page CNVT-CRS
are:parametersinputThe
Address1 and Address2 channelsSTS-1twotheofaddressestheareThese
bewillandcross-connectedcurrentlyarethat
cross-connections.VT1.528toconverted
Addresses:STS-1Valid {a,b,c},
{a,b}-{1-2}{m,c}-{1-3},
inOLIU29-typeor24-withequippedisshelftheIf
are:addressesSTS-1validtheunits,Mainits
c-{1-3}{a,b}-{1,2},{a,b,c},m-{1-12},
NOTE:
cross-connectionsVT1.528converttoavailableiscapabilityinverseNo
userthethis,achievetoorderIncross-connection.STS-1singleatoback
theusingcross-connectionsVT1.528theofeachdeletemust
dlt-crs-vt1 usingcross-connectionSTS-1theenterthenandcommand
the ent-crs-sts1 command.
thebysetmode,cross-connecttheifsystems,linearIn set-ne hascommand,
followingthewithdeniedbewillcommandthisofexecutiondefault,ofvaluea
message:denial
SVNS
/*etatSdilaVnitoN,sutatS*/
/*.snoitcennoc-ssorctluafedrofdenoisivorpmetsyS*/
Address1 and Address2 orcross-connectionSTS-1existinganmatchmust
message:followingthewithdeniedbewillcommandtheofexecution
SVNS
/*etatSdilaVnitoN,sutatS*/
/*.tsixetonseodnoitcennoc-ssorc1-STSdeificepsehT*/
OC-3DDM-2000 2000February2Issue 11-35

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English