Lucent Technologies DDM-2000 OC-3 - Page 718

DLT-CRS-STS1 4of1Page DLT-CRS-STS1
NAME
STS-1Cross-ConnectionDeletedlt-crs-sts1:
FORMATINPUT
dlt-crs-sts1: Address1 , Address2 [: cct= CrsType];
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
cross-connections.STS-1deletescommandThis
NOTE:
cross-connecttheifexecutedbeonlycancommandthissystems,linearIn
(manualtosetismode crs= manual thebyprovisionedas) set-ne
command.
are:parametersinputThe
Address1 and Address2
STS-1oneorchannels,STS-1twotheofaddressestheareThese
13.0)Release(inDS3/EC-1/OC-3/MXRVO/TMUXoneandchannel
toiscross-connectionSTS-1existingthewherelineOC-1orport
areconnectionspass-throughapplications,ringIndeleted.be
foraddresssametheusingbydeleted Address1 and
Address2 .
Addresses:STS-1OC-3Valid
{a,b}-{1-2}{a,b,c},{m,c}-{1-3},
theunits,MainitsinOLIUs24-typewithequippedisshelftheIf
are:AddressesSTS-1valid
{a,b}-{1,2}{a,b,c},c-{1-3},m-{1-12},
theunits,MainitsinOLIUs29-typewithequippedisshelftheIf
are:AddressesSTS-1valid
m-{1-12},
{a,b}-{1,2}{a,b,c},c-{1-3},
cct isparameterThistype.cross-connectionthespecifiesCrsType
are:valuesvalidThereleases.ringOC-3allwithavailable
twoway toapplycross-connections(default)Two-way
hairpin,pass-through,add/drop,hubbing,terminating,
defaulttheisThisconfigurations.ring.0x1andDS30x1
cross-two-wayconfigurations,ring0x1Invalue.
and,OC-1single-homedanddual-supportconnections
Forapplications.ringOC-315.0,Releasewithbeginning
11-48 2000February2Issue OC-3DDM-2000