Lucent Technologies DDM-2000 OC-3 User Manual

ENT-CRS-STS3c 5of1Page ENT-CRS-STS3c
NAME
STS-3cCross-ConnectionEnterent-crs-sts3c:
FORMATINPUT
ent-crs-sts3c: Address1 , Address2 [: cct= CrsType];
DESCRIPTION
andmain-1betweencross-connectionsSTS-3cbidirectionalsetscommandThis
andmainbetweenorpacks),circuitOLIU29-typeor24-typethe(usingmain-2
OLIUs22-typeandslotsunitmaininOLIUs29-typethe(usingslotsunitfunction
application.0X1STS-3cthesupporttoslots)unitfunctionthein
1:NOTE
featureoptionalaniscross-connectionSTS-3cthereleases,OC-3linearIn
featureThisTechnologies.Lucentfromlicensespecialarequiresthat
theviaenabledbefirstmust set-feat cross-thebeforecommand
place.takesrequestconnection
2:NOTE
equippedisshelftheifONLYshelfOC-3aninusedbecancommandThis
onlyTheunits.MainitsinpackscircuitOLIU29-typeor24-typewith
aretypescross-connectallowed Twoway.
onlytheMain,inOLIU24-typetheusingWhen Twoway allowedcross-connect
onlytheMain,inOLIU29-typetheusingWhenPass-Through.is Twoway
otherAll0X1).(forAdd-DropandPass-Throughareallowedcross-connects
time.thisatvalidnotaretypescross-connect
NOTE:
ringOC-3incross-connectsSTS-3cforrequirednotislicensingSpecial
MaintheirinOLIUstype29-typeor24G-Uwithequippedarethatshelves
slots.unit
11-82 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English