Lucent Technologies DDM-2000 OC-3 User Manual

ENT-CRS-STS3c 5of3Page ENT-CRS-STS3c
awithissuediscommandthisif15.0,ReleaseOC-3withStarting cct
toequalparameter twoway Address2),fromdifferentis(Address1add-dropfor
theinparameterapplicationtheifand set-oc3 tosetiscommand 1+1 The:
displayedbewillmessagedenialfollowing
SVNS
/*etatSdilaVnitoN,sutatS*/
/*.tseuqernoitcennoc-ssorcdilavnI*/
0X1aifslots,FninOLIUs22-typeandMaininOLIUs29-typeusingWhen
0X1withinterface(s)OC-3theprovisioningrequiresthisdesired,isapplication
theusingtypeapplication set-oc3 command.
cross-STS-3cactivewhereaddressesusinginvokediscommandthisIf
addressSTS-3cthewithincross-connectionsSTS-1activeorconnections
displayed:bewillmessagedenialfollowingtheexist,already
CCAS
/*detcennoC-ssorCydaerlA,sutatS*/
tahtseriuqersnoitcennoc-ssorcwengnihsilbatsE*/
esehthtiwdetaicossasnoitcennoc-ssorcgnitsixe
/*.deteledebsesserdda
invalidtype,packcircuitinvalidanincludesrequestcross-connectiontheIf
thesystem,thebysupportednotcross-connectionaspecifiesoraddress,
displayed:bewillmessagedenialfollowing
SVNS
/*etatSdilaVnitoN,sutatS*/
/*.tseuqernoitcennoc-ssorcdilavnI*/
11-84 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English