Lucent Technologies DDM-2000 OC-3 User Manual

ENT-OSACMAP 5of1Page ENT-OSACMAP
NAME
mapIDcontextapplicationOSenterent-osacmap:
FORMATINPUT
ent-osacmap:vc= VCType ,snpa= SNPA ,acid= ACID ;
ent-osacmap:[Address][:[porttype= porttype ][,vc= VCType ]
[,snpa= SNPA ][,]acid= ACID ];
later)and15.0ReleaseOC-3(For
DESCRIPTION
map.contextapplicationsubnetworkX.25theinentriescreatescommandThis
circuitvirtualswitchedand(PVCs)circuitsvirtualpermanentthelistsmapThis
(OS)systemsoperationtothemmapsandchannelX.25theinavailable(SVC)
terminaldatathelistscommandthisSVC,theForIds.contextapplication
contexts.applicationOSvariousthebyusedaddressescalling(DTE)equipment
situations.mosttoapplyshouldwhichprovided,arePVCstheforDefaults
portCITthemapwillcommandthis15.0,ReleaseOC-3withStarting
toAsynchronous)asprovisioned(whenportX.25theorTL1),for(provisioned
contexts.application(OS)systemsoperations
1:NOTE
thisthenshelf,aonportDCCorCITanyonenabledissecurityIf
onportsDCCorCITallforonlyusersprivilegedtoavailableiscommand
shelf.the
2:NOTE
subnetwork,theinelementsnetworkallatallowediscommandthisWhile
active.isnodeGNEactivetheattabletheonly
are:parametersinputThe
address port)(DTEX.25AsynchronousanorCITaofaddresstheisAddress
isaddressdefaultTheport. x25:
Addresses:Valid x25cit-{1,2},
porttype AddressprovisionedthewhetherSpecifies cit-1 front-port(DCE
oraccess) cit-2 forusedisaccess)rear-port(DTE
CIT or TL1
isAddressofvaluetheIfapplication. cit-2orcit-1 this,
values:possibletwohavecanparameter cit or tl1 Default.
isvalue cit.
isAddressofvaluetheIf x25 possibletwohavecanparameterthis,
values: synch or, asynch isvalueDefault. synch.
11-104 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English