Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-LAN 6of5Page RTRV-LAN
dsx_state incomingtheofstatemanagementtheindicatesparameterThis
interfacecustomerorDSXthefrominterfacesignalLAN
(InISAUTO,MONitored),(NotNMONarevaluesThedirection.
andcommand"upd"thethroughcontrolledisstateTheService).
command."set-state-t1"the
sonet_state incomingtheofstatemanagementtheindicatesparameterThis
direction.speedhighorSONETthefrominterfacesignalLAN
Service).(InISAUTO,MONitored),(NotNMONarevaluesThe
thethroughcontrolledisstateThe upd theandcommand
set-state-t1 command.
Apply
Action IMAdormantaifONLYreportedisparameterThis
thebystoredcurrentlyisgenericsoftwareLAN
theandelement,network apply issuediscommand
withinstallationprogramfor Action=install
NOTE:
applyanifreportednotisparameterThis
beenhasaddressspecificatocommand
InarethatcommandsapplyOnlycompleted.
commandsapplyandrunning)(stillProgress
report).thisinlistedareexecutionforqueued
NOTisparameterthispack,circuitLANIMAeachFor
yet.issuedisapplyprogramLANIMAnoifreported
currentlyisgenericsoftwaredormantLANIMAanIf
theandelement,networkthebystored apply
withissuediscommand Action=cancel "blanka,
Action.forreportedis"
NOTE:
applyanifreportednotisparameterThis
specificatoAction=cancelwithcommand
address.
Address LANIMAthewithequippedslot(s)SpeedLowtheofAddress
pack
OC-3DDM-2000 2000February2Issue 11-199

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English