Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-OSACMAP 4of3Page RTRV-OSACMAP
ACID theiswhichcharacters,alphanumeric23toupofstringaisACID
SNPAparticularatoassignedbetoIDContextApplication
valuesDefaultassigned.ACIDofvalueahasOSEachAddress.
supportedTheDDM-2000.bysupportedapplicationsOSforexist
are:typesapplications
tl1Maintenance
tl1MemoryAdministration
tl1PeerComm
tl1Test
tl1CR
tl1Other1
tl1Other2
.
Address releases.laterand15.0ReleaseOC-3toApplicable
anorport,X.25Asynchronousport,CITaofaddresstheisThis
port.X.25Synchronous
Addresses:Valid x25cit-{1,2},
NOTE:
incolumnseparateaaslistednotisparameterAddressThe
itsbyfollowed"Address:"stringtheasratherbutreport,this
value.
annotandGNE,activeannotisthatnodeaatenterediscommandthisWhen
active
limited willmessagecautionfollowingthe15.0),Release(OC-3GNE
printed:isreportthebeforedisplayedbe
tcatonsitropeRpaMtxetnoCnoitacilppASOsihT!noituaC*/ .evi
/*.evitcasiENGatapamehtylnO
NOTE:
aconsiderediselementnetworkA limited beenhasitifGNE
port.X.25AsynchronoustheoverorportCITaoverTL1runtoprovisioned
theonassociationsTL1remote(50)fiftytoupsupportonlycanGNElimitedA
port.CIT
11-232 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English