RTRV-SECU 5of3Page RTRV-SECU
are:parametersoutputThe
LinkAccess interface.DCCorCITaofaddresstheislinkAccess
Addresses:OC-3Valid dcc, cit-{1,2}
Addresses:InterfaceOC-1Valid dcc
AddressesDCCX.25/TL1Valid
13.0):ReleaseOC-3with(Starting
x25(SVC)andx25(PVC) GNE),aisNElocalif(only
dcc non-GNE)atoaccessremoteTL1forused(when
Address:Synchronous/AsynchronousX.25Valid
15.0):ReleaseOC-3with(Starting
x25
TypePort 15.0.ReleaseOC-3withstartingavailableisparameterThis
(AddressprovisionedthewhetherspecifiesIt cit-1 or
cit-2 forusedbeingis) tl1 or cit theIfapplication.
isLinkAccessunderreportedvalue cit-2orcit-1 the,
becanparameterthisforvaluereported tl1 or cit.
isLinkAccessunderreportedvaluetheIf x25 reportedthe,
becanparameterthisforvalue synch or asynch.
isTypePortunderreportedvaluetheIf synch thethen,
includewillreporttheofsectionsecond x25(PVC/SVC)
information; dcc well.asincludedbemightinformation
isTypePortunderreportedvaluetheIf asynch thethen,
sectionsecondtheinreportedbemightthatinformationonly
TL1forisreporttheof dcc.
No
porttype
thewhenreportedisvalueparameter
isLinkAccess dcc (blank).""abydesignatedbewillthis;
baudrate 15.0.ReleaseOC-3withstartingavailableisparameterThis
aremessagesTL1whichinbaudratethespecifiesIt
are:parameterthisforvaluesThereceived/transmitted.
1200, 2400, 4800, 9600 19200.and(Default),
eitherisTypePortifonlyreported,isparameterThis tl1 or
asynch reported.is(blank)""aotherwise;
echo 15.0.ReleaseOC-3withstartingavailableisparameterThis
betoneedsenteredcharacterthewhetherspecifiesIt
are:valuesreportedTheback.echoed enabled (default)
or disabled.
eitherisTypePortifonlyreportedisparameterThis tl1 or
asynch reported.is(blank)""aotherwise;
UserActive 13.0.ReleaseOC-3withstartingavailableisparameterThis
currentlyisthatidloginuser’stheonreportsparameterThis
byidentifiedportcommunicationtheviaNEtheintologged
11-286 2000February2Issue OC-3DDM-2000
To Next Page
Loading...
Need help?
General
