Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-STATE-OC1 2of1Page RTRV-STATE-OC1
NAME
LinesOC-1ofStateRetrievertrv-state-oc1:
FORMATINPUT
rtrv-state-oc1[: Address ];
DESCRIPTION
states.lineOC-1retrievescommandThis
is:parameterinputThe
Address betoisstatewhoselinesOC-1theofaddresstheisAddress
isdefaultThereported. all addressesvalidOtherlines.OC-1
are:
fn-{a,b,c}-all,main-{1,2}-{1,2},main-all,
fn-{a,b,c}-{1,2}-{1,2}fn-all,
OLIUs)27-type(For
fn-{a,b,c}-{1,2}-1fn-all,fn-{a,b,c}-all,
OLIUs)26G2-U(For
bewillcross-connectedarethatlinesOnlyfollows.asappearsreportoutputThe
report.outputtheindisplayed
tropeRetatSeniL1-CO*/
=================================================== =================
etatSeniLsserddA
=================================================== =================
si1-1-niam
si1-2-niam
nomn2-2-niam
si1-1-a-nf
nomn2-2-c-nf
..
..
..
/*
11-296 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English