Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-STATE-STS1 3of2Page RTRV-STATE-STS1
tropeRetatSlennahC1-STS*/
=================================================== ==============
etatSlennahCsserddA
=================================================== ==============
OTUA1-m
SI2-m
OTUA1-a
SI2-b
NOMN3-c
..
..
/*
NOTE:
noiforcross-connectionsnoarethereifdisplayedisreportemptyAn
cross-connections).pass-throughexample,(formonitoredarechannels
are:parametersoutputThe
Address channel.STS-1anofaddresstheisAddress
StateChannel inidentifiedchannelSTS-1theofstatetheisStateChannel
values:followingtheofonehavemayItfield.addressthe
auto thisonsignalgoodanotisThereAutomatic.
pointeroflossSTS-1orAIS(STS-1channel.
statusorAlarmpresent.)bemaycondition[LOP]
notarechannelthiswithassociatedconditions
fordonenotismonitoringPerformancereported.
thisondetectedissignalgoodaIfchannel.the
theinputbewillchannelthethenchannel,
in-service automatically.state
is andAlarmmonitored.ischannelTheIn-service.
normally.reportedareconditionsstatus
nmon beingnotischannelTheMonitored.Not
notareconditionsstatusandAlarmmonitored.
monitoringPerformancechannel.thisforreported
willchannelThechannel.thefordonenotis
(withchangedisstatetheuntilstatethisinremain
the set-state-sts1 theuntilorcommand)
deleted.ischannelthisinvolvingcross-connection
11-302 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English