Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-SYNC 11of11Page RTRV-SYNC
thetoadditionintiming,lineinprovisionedsystems
provisionedissourcesynctheifMessages,Inputabove
receivingisandmessagingsyncoftypeSbytefor
3StratumTraceable , 2StratumTraceable or,
TraceablePRS messagesoutputthethenmessages,
willKbyteforprovisionedinterfacesopticaltheofanyon
be 3Stratum , 2Stratum or, 1Stratum ,
respectively.
Type themessagingsyncoftypetheidentifiescolumnThis
theusingforprovisionedwasinterfaceoptical set-oc3
and/or set-oc12 are:valuesvalidThecommand.
Kbyte
Sbyte
disabled
NOTE:
displayonlywillcolumnthisinterfaces,OC-1For
Kbyte.
AutoreconfigurationSync
bestthechoosetosystemtheallowscapabilityThis
timing.lineforprovisionedisitwhenusetosourcetiming
arevaluesvalidThe enabled and disabled.
isAutoreconfigSync disabled default.by
COMMANDSRELATED
rtrv-oc3
rtrv-state
set-sync
set-oc3
switch-sync
11-320 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English