5.2 STARTING AND STOPPING ENGINE M A E D A Crawler Crane
5-6 5/2020 CC1908S-1
OPERATIONS AND
CHECKS BEFORE
STARTING ENGINE
WARNING
When starting the engine, check that the lock
lever is securely in the lock position.
Otherwise, if you accidentally touch the
control levers or pedals while starting the
engine, the machine may move unexpectedly,
resulting in serious personal injury.
1.
Check that the lock lever (1) is in the lock
position (L).
2.
Check that each control lever is in the
"Neutral" position.
Unless they are touched, the control levers
will be in the "Neutral" position.
3.
Insert the key into the starter switch (2), turn
the key to the "ON" position, and check the
following:
• If a password is set, an input display
screen is displayed on the monitor
screen.
Enter the password using the switches
corresponding to each number. Once the
password is confirmed, the screen
switches to the home screen.
Pressing "Delete" deletes one character.
Although the engine can be started
without entering the password, the
travelling and crane operations cannot
be performed.
To Next Page
Loading...
