M A E D A Crawler Crane 6.16 INSPECTION
5/2020 CC1908S-1 6-41
INSPECTION AND CHECK
AFTER COMPLETING
WORK
AFTER STOPPING ENGINE
1.
Check for oil and water leaks, and conduct a
walk-around check of the crane, exterior, and
undercarriage.
If you find any leakage or abnormality, fix the
problem.
2.
Fill up the fuel tank to full.
3.
Remove any paper and dead leaves from
inside the engine compartment and around
the battery in order to prevent fires.
4.
Remove any mud adhering to the
undercarriage.
LOCKING
Be sure to lock the lockable caps and covers.
For details on locking, refer to "6.10 LOCKABLE
DOORS AND COVERS" on P. 6-20.
To Next Page
Loading...
