Maeda CC1908S-1 - Auto Mode; Manual Operation

5.6 AIR CONDITIONER OPERATION M A E D A Crawler Crane
5-50 5/2020 CC1908S-1
［7］ Auto switch
Use this switch to start the air conditioner in auto
mode.
Switches fan and air blowing selection to auto
mode.
［8］ A/C switch
Use this switch to turn the air conditioner
(cooling, dehumidifying, and heating) functions
on and off.
Check the display monitor to see whether the air
conditioner is running or stopped.
The air conditioner is on if it is on the display and
off if it is not.
• If the air conditioner function is turned off while
the fan is operating, only the air blow function
will operate.
• The air conditioner will turn off if the fan is not
running.
OPERATION PROCEDURES
5.6.3.1 AUTO MODE
1. Press the Auto switch to start the air
conditioner.
All of the steps in manual operation will be
performed automatically.
5.6.3.2 MANUAL OPERATION
1. Press the fan switches to adjust the air flow
level.
Check that the temperature setting and air
flow level are displayed on the display
monitor.
2. Press the air conditioner switch to turn it to
"ON".