M A E D A Crawler Crane 6.14 MACHINERY COVER
5/2020 CC1908S-1 6-23
2. After pulling out the key, open the machinery
cover (2) while pushing the machinery cover
open knob (1).
3. After opening the machinery cover, secure
the machinery cover supporting rod (3) to the
machinery cover securing position.
4. To close the machinery cover (2), remove the
machinery cover supporting rod (3) and
securely fix it to the lever lock. Then, gently
lower the machinery cover and push down
the machinery cover to lock it.
5. Insert the key into the machinery cover open
knob (1) to lock it.
To Next Page
Loading...
