6.21 ERROR CODES AND WARNINGS M A E D A Crawler Crane
6-114 5/2020 CC1908S-1
MESSAGE DISPLAY
The following messages may appear on the monitor screen depending on the state of the machine body.
Message Display conditions
Stop idling is recommended. No operations were performed for at least 5 minutes with
the engine running.
Set time. The current year set is earlier than 2015.
Check electrical connection. The connector was not reconnected when the fly jib was
attached.
Set the boom raise lever back to neutral. Boom raise lever (right-hand control lever) left operated
with maintenance switch turned off while raising is
cancelled.
Low engine speed while boom raising auto
stop function is released.
Maintenance switch is on while raising is stopped.
Overriding.Stop engine to reset. Override switch is on.
(Error code + error details displayed) Only a single error has occurred.
Multiple errors. Multiple errors have occurred.
May not be displayed depending on the monitor settings. For details on how to show or hide the
display, contact us or our sales service agency.
To Next Page
Loading...
