Malfunctions in driving mode
7.7 Procedure in the event of malfunctions
Operating Manual GMK6300L 3 112 xxx en 7 - 41
xx.xx.xxxx
Transmission oil too hot
The transmission may only shift up to the 2nd gear.
The display (1) shows the current oil temperature.
• Stop at the next opportunity.
– If the coolant temperature (1) is normal (
à p. 4 - 20), then check the oil
level in the transmission and top up if necessary;
à Oil level gauge,
p. 5 - 36.
– If the coolant temperature (1) has increased, shift into the neutral posi-
tion N and let the engine run at an increased speed. If the symbol (2) is
still shown after approx. 3 minutes, shut down the engine. Read the
error codes (
à p. 7 - 42) and contact Manitowoc Crane Care.
• Apply the parking brake.
• Switch to neutral position N. You can now not select any gear position.
• Read the error codes (à p. 7 - 42) and contact Manitowoc Crane Care.
s
S
Risk of overheating damage to the transmission!
If the transmission oil temperature is still too high after 2 to 3 minutes, shut
down the engine. Under no circumstances should you continue driving.
This prevents the transmission from being damaged due to overheating.
To Next Page
Loading...
Need help?
General
