Malfunctions in driving mode
7.7 Procedure in the event of malfunctions
7 - 42 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Reading out error
codes
You can display all the stored error codes one after the other.
• Press buttons (1) and (2) simultaneously twice.
The
Transmission display shows the first stored error code.
Each error code consists of four displays that are shown continuously in
succession.
• To read further error codes, press button (1).
Each time you press the button, the next error code will be displayed.
H
As long as error codes are shown, the driving mode switched on has no
influence on the lamp (2).
• Press button (1) once to exit the error display.
or
• Press buttons (2) and (3) together once.
1 Error type
2 Error number, 1st part
3 Error number, 2nd part
To Next Page
Loading...
Need help?
General
