Operating elements for crane operation
9.2 Short description of the operating elements
9 - 98 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
Submenu Rigging
mode entry
à Enter rigging mode, p. 11 - 23
Selection
In input mode
Enter RCL code
Determine the displayed RCL code
1 Press button once – display of next highest value
2 Press button once – display next lowest value
– Input mode on: Press button (1) once – symbol green
– Input: In input mode, press button (3) once – on display (2)
next RCL code
à p. 11 - 28
– Symbol (1): RCL code is determined after selecting Rigging mode
– No display: New RCL code is displayed
à p. 11 - 25
To Next Page
Loading...
Need help?
General
