Medrad™ Intego™
PET Infusion System
54
CAUTION: Incorrect installation of the SAS may result in improper functioning
of the Intego™ PET Infusion System.
13. Firmly press the Patient Tube exiting the PAS Pinch Valve into the Air Detector Holder and
Air Detector. Insert the Swabbable Valve into the Swabbable Valve Holder.
NOTE: Make certain the tubing is fully inserted into the Air Detector as illustrated below.
CAUTION: Incorrect installation of the SAS may result in improper functioning
of the Intego™ PET Infusion System.
14. Insert the Saline Spike into the Saline Container. Verify the Saline Spike is fully inserted
into the container as illustrated below.
CAUTION: Incorrect installation of the SAS may result in improper functioning
of the Intego™ PET Infusion System.
15. Open the Saline Pump door, install the Saline Tube, then close the Saline Pump door.
To Next Page
Loading...
