Microplex LOGIJET TC8 - Normal Print Mode Activation (Incl. FORM FEED)

118 Panel Functions
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex logiJET TC8 Edition 1.2
7.12. Normal Print Mode Activation (incl. FORM FEED)
The normal print mode suspends the Hexdump Mode.
This function is activated, when a print job must be continued
without turning the printer off and on again.
used to produce a FORM FEED.
Panel display
[ON LINE ]
[Menu Level 1 ]
[Status Sheet ]
  
[Normal Print/FF ]
[Normal Print/FF ]
Notes
Turn the printer OFF LINE with this
key.
Menu level 1 is selected.
Press the NEXT or PREVIOUS key until
[Normal Print/FF ] is displayed.
The normal print mode is activated.
Turn the printer ON LINE again:
Press the ONLINE key longer than
2 seconds.
Note:
After activating the normal print mode a FORM FEED is released
automatically and one sheet is put out.
This is necessary because after a test in the Hexdump Mode it is
possible that data can remain in the input buffer unintentionally
(cause: in the Hexdump Mode no control characters are evaluated
and no FORM FEED is effected).