Microplex LOGIJET TC8 - Display Language Selection

Panel Functions 125
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex logiJET TC8 Edition 1.2
7.18. Display Language Selection
This function enables the user to determine the language for the
display messages, the status sheet and the font list.
Panel display
[ON LINE ]
[Menu Level 1 ]
  
[Configuration ]
[Interface ]
  
[Language ]
[German ]
  
[English ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key
until [Configuration ] is displayed.
Press the NEXT or PREVIOUS key
until [Language ] is displayed.
Press the NEXT or PREVIOUS key
until the desired language (e.g.
English) is displayed.
The display language English is
selected.
In addition this new value can be
saved as setup value (using the
ENTER key).
After this decision turn the printer
ON LINE again: Press the ON LINE
key longer than 2 seconds.