Microplex LOGIJET TC8 - Font Selection

Panel Functions 129
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex logiJET TC8 Edition 1.2
7.22. Font Selection
This function selects the active font. Select font number out of
the list of available fonts.
Panel display
[ON LINE ]
[Menu Level 1 ]
  
[Page Menu ]
[Font Number ]
[Font 600 ]
  
[Font 5507 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key
until [Page Menu ] is displayed.
Press the NEXT or PREVIOUS key
until the desired font number (e.g.
5507 Langeoog) is displayed.
The font number 5507 Langeoog is
selected.
In addition this new value can be
saved as setup value (using the
ENTER key).
After this decision turn the printer
ON LINE again: Press the ON LINE
key longer than 2 seconds.