The Printer is shipped with special packing material and fixing
measures.
It is recommended to store the boxes and those packing materials.
In case of further shipping or returning of the products they must
be repacked in the original way in order to avoid damaging during
transportation.
The following list gives you an overview of the working steps necessary
for repacking. Pay attention to the notices located on the products and
the hints given in the Service Manual as well.
If you are not familiar with any of the working steps please ask your
service engineer or your supplier.
Remove the paper.
Remove the ribbons, if any is loaded.
Close the printhead.
Lock all moveable parts of the printer (use all original transport
safety devices, adhesive fasteners and so on).
Repack all items in their original packing material and ship them in the
original boxes.
To Next Page
Loading...
