202 Appendix
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex logiJET TC8 Edition 1.2
12.4.4. Prescribe IIe
The following color commands are available at present:
ACLI index, color1, color2, color3; Add Color by Index
Index: 1 .. 255
color: 0 .. 255
SCOL number; Select Color
number: 0 .. 255
CID color-space, encoding; Configure Color Image Data
color-space:
0 = Device-dependent RGB (Default)
1 = Device-dependent CMY
2 = Void
3 = CIE L*a*b
encoding (Pixel encoding):
1 = Indexed by Pixel (Default)
3 = Direct by Pixel
Color bitmaps (24 Bit RGB, uncompressed) can be defined using the
following command:
RVCL length, data; Receive Color Raster Data
length: bytes of raster data
data: binary raster data 0H to FFH
12.4.5. Epson FX (ESC/P)
This color commands are Epson Stylus compatible.
Command for switching a color on:
<ESC>r <nn>
<nn> = 00 black
<nn> = 01 magenta
<nn> = 02 cyan
<nn> = 03 magenta
<nn> = 04 yellow
<nn> = 05 red
<nn> = 06 green
To Next Page
Loading...
