Microplex LOGIJET TC8 - Code

Appendix 201
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex logiJET TC8 Edition 1.2
b) Colored logos:
Colored logos can be defined using the following IGP command
^LOGO;LOGO NAME;VL;HL
The following formats are supported:
PCX: 1 bit black/white
24 Bit RGB
TIFF: 1 bit black/white
12.4.3. CODE V
The original page description language CODE V has no commands for color
control.
Microplex has added commands in CODE V syntax to this emulation which
enable a color control.
Command for switching a color on:
^|COLOR; <n>
<n> = 1 1st color (Default: black)
<n> = 2 yellow
<n> = 3 cyan
<n> = 4 magenta
<n> = 5 red
<n> = 6 green
<n> = 7 blue