- The chosen location should be well-ventilated, clean and dry.
- Damaging environmental factors such as metal vapors, oil mist,
corroding lixivium or the like must not come into contact with
the printer.
- Position the printer on solid and level ground.
- Do not exposure the printer to shocks or vibrations.
- The printer and socket have to be easily accessible.
- The printer should not be located near volatile or combustible
materials (e.g. a curtain).
- The printer must be connected to an appropriate AC power
source: 100 240 V AC ( - 10%, + 6%), 3.2 6.4 A, 50/60 Hz
The power source must be properly grounded.
The socket and power cords must not be damaged.
- Use the printer only within the allowed fluctuation range
(the allowed values are listed above).
- The voltage support must not be impaired by interference.
- In order to run the printer reliably, please maintain the
following environmental conditions:
Temperature: +5°C to +35°C
-20°C to +60°C (storage temperature)
Relative atmospheric humidity: 45% to 75% (without
condensation)
- Do not expose the printer to abrupt temperature changes
(heating, window or air condition).
- The printer should not be exposed to direct sunlight.
To Next Page
Loading...
