132 Panel Functions
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex logiJET TC8 Edition 1.2
7.23. Text Orientation Selection
This function selects the active text orientation.
Panel display
[ON LINE ]
[Menu Level 1 ]
[Page Menu ]
[Font Number ]
[Orientation ]
[Orientation 0 ]
[Orientation 1 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key
until [Page Menu ] is displayed.
Press the NEXT or PREVIOUS key
until [Orientation ] is displayed.
Press the NEXT or PREVIOUS key
until the desired orientation is
displayed.
The orientation 1 = landscape is
selected.
In addition this new value can be
saved as setup value (using the
ENTER key).
After this decision turn the printer
ON LINE again: Press the ON LINE
key longer than 2 seconds.
Text orientation assignment:
Orientation 0 = Portrait (upright format)
Orientation 1 = Landscape (horizontal format)
Orientation 2 = Portrait upside down
Orientation 3 = Landscape upside down
To Next Page
Loading...
