Microplex LOGIJET TC8 - Page 192

192 Appendix
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex logiJET TC8 Edition 1.2
1. First print color (full area)
o Black RGB: 0,0,0
CMYK: 0,0,0,100
2.
o Gray tones (shades) RGB values the same (e.g. 10,10,10)
CMY values = 0, K values 1..100 (e.g. 0,0,0,10)
3. Second print color (full area)
o All primary colors
 Red RGB: 255,0,0 CMYK: 0,100,100,0
 Green RGB: 0,255,0 CMYK: 100,0,100,0
 Blue RGB: 0,0,255 CMYK: 100,100,0,0
 Yellow RGB: - CMYK: 0,0,100,0
 Cyan RGB: - CMYK: 100,0,0,0
 Magenta RGB: - CMYK: 0,100,0,0
4.
o All other color values
All colors, that are not black, gray or primary colors, are printed
dithered with the second print color.
Hints on how to deal with mixed colors
If you want to print for example colored pictures or colored diagrams,
in your application these objects ought to be created using the two
colors of the printer. Eventually you have to delete the old color areas
and replace them by the 2 spot colors (black and red, for example).