Contents 5
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex logiJET TC8 Edition 1.2
Chapter Page
7.17. Emulation Selection 123
7.18. Display Language Selection 125
7.19. Transparent Code Adjustment 126
7.20. Selection of Memory Distribution (Input Buffer) 127
7.21. Setting to Factory Default 128
7.22. Font Selection 129
7.23. Text Orientation Selection 132
7.24. Symbol Code Selection 133
7.25. Print Speed Adjustment 134
7.26. Density (Contrast) Setting 135
7.27. Image Shifting to the X-Direction 136
7.28. Image Shifting to the Y-Direction 138
7.29. Peripheral Device Activation (Tear Off Edge, Cutter) 140
7.30. Selecting the Tear Off Mode (Option: Cutting Mode) 142
7.31. Adjusting the Tear Off Position (Option: Cutting Position) 144
7.32. Selecting the Print Mode 146
7.33. Configuration of Network Parameters (IP Address, e.g.) 149
8. Operator Maintenance 153
8.1. Printer Cleaning 153
8.1.1. Printer Cabinet Cleaning 154
8.1.2. Cleaning the Printheads 155
8.1.3. Platen Roller Cleaning 159
8.1.4. Cleaning the Sensors 162
8.2. Avoiding Ribbon Slack and Wrinkles 165
8.3. Check the Printhead Pressure 171
9. Troubleshooting 173
9.1. Error Messages 174
9.2. Reduced Print Quality 177
9.3. Incorrect Media Transport 179
9.4. Clearing Paper Jam 181
9.5. Print Repetition after an Error 184
To Next Page
Loading...
