Microplex LOGIJET TC8 - Page 62

62 Handling of Consumables
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex logiJET TC8 Edition 1.2
11. After taking out the takeup mandrel turn it clockwise until
the free end of ribbon between the two rolls is winded up.
Fig. 5.2.4.f Winding up the free end of the ribbon
12. Take the two ribbon mandrels out of the ribbon rolls, if
need be (compare section 5.2.2).
13. n
in order to allow using it again in the future.

Now the new ribbon has to be loaded as described in
section 5.2.2.
