MIMAKI JV3-160SP - Serial no

– 5.20 –
5-3-8. SERIAL NO.
[Function]
Enter a serial number for plotter using.
[Operation]
1) Select the ADJUSTMENT.
Press the
ENTER
key.
2) Select the “SERIAL NO” with the
FUNCTION
key, and then press the
ENTER
key.
3) Use the
and keys to enter the value.
Use the
and keys to move the cursol
left and right.
Press the
ENTER
key again, and then the ID
number can be entered.
4) Press the
ENTER
key to finalize the number.
FUNCTION
# ADJUST < ENT >
# ADJUST
SERIAL NO < ent >
# SERIAL NO
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗