MIMAKI JV3-160SP User Manual

– 5.42 –
5-4-7. HEATER TEST
[Function]
Perform stand -alone test of the Preheater, and Printheater and check the LEDs on the external
heater panel.
[Operation]
1) Select the “TEST”.
Press the
ENTER
key.
2) Select the “HEATER TEST” pressing the
FUNCTION
key.
Press the
ENTER
key.
3) Select the plot parameter using the
or
key.
[TEMP] : Temperature
[HEAT LED] : HeatLED-ON/OFF
[constantLED] : ConstantLED-ON/OFF
[SSR] : Heater-ON/OFF
FUNCTION
# TEST < ENT >
# TEST
HEATER TEST < ent >
# HEATER TEST
TEMP < ent >
# HEATER TEST
HEAT LED < ent >
# HEATER TEST
constant LED < ent >
# HEATER TEST
SSR < ent >

MIMAKI JV3-160SP Specifications

General

Brand	MIMAKI
Model	JV3-160SP
Category	Plotter
Language	English