MIMAKI JV3-160SP - Ink Parameter; Maintenance Parameter; Servo Parameter; Adjustment Parameter

– 5.68 –
5-5-2. INK PARAMETER 1
This is not used in the field.
Never change the value.
5-5-3. INK PARAMETER 2
This is not used in the field.
Never change the value.
5-5-4. INK PARAMETER 3
This is not used in the field.
Never change the value.
5-5-5. MAINTENANCE PARAMETER
This is not used in the field.
Never change the value.
5-5-6. SERVO PARAMETER
This is not used in the field.
Never change the value.
5-5-7. ADJUSTMENT PARAMETER
Parameters are present for each waveform plot. The value of each parameter can be changed
and stored automatically through adjustment.