MIMAKI JV3-160SP - Worm Wheel

– 5.22 –
FUNCTION
# ADJUST < ENT >
# ADJUST
WORM WHEEL < ent >
#WORM WHEEL
X : S= ∗. ∗ ∗ A= ∗ .∗ ∗
5-3-10. WORM WHEEL
[Function]
Perform eccentric correction of worm gears.
< This is not used in the field. >
[Operation]
1) Select the “ADJUSTMENT”.
Press the
ENTER
key.
2) Select the “WORM WHEEL” wity the
FUNCTION
key, and then press the
ENTER
key.
3)
4) Press the key to finalize the number.