– 2.11 –
2-1-9. Linear encoder PCB
This board, located on the back of the slider, reads the linear scale.
2-1-10. The Keyboard PCB
A 16 character x 2 line LCD, an LED that indicates +5V supply and 11 tact switches are
mounted on the K/B PCB. It is connected to the IO PCB via the K/B cable.
2-1-11. Take-up motor PCB
Located in the Take-up device, and rotates a motor as receiving power from the IO PCB.
Normal and reverse rotation of take-up device is perfromed by take-up device switch.
2-1-12. Fan relay PCB
Located in the electrical unit and serves as the relay board for the fan motor.
2-1-13. Fan branch PCB ( x 2)
Located in the dry fan unit and serves as the relay board for the fan motor.
-For 130SPII /130SL/160SP ( x 2) available as a standard
-For 75SPII ( x 1) available as an option
2-1-14. ID contact board ( x 8)
This board is a contact board of the ink cartridge ID. It is located in each cartridge slot.
To Next Page
Loading...
Need help?
General