Name: Mindray A7
Brand: Mindray
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cleaning and Disinfection Maintenance

7 - 20 046-004667-00 A7™ Operating Instructions

4. Cleaning

a. Clean the absorber canister with a soft, lint-free cloth and a recommended cleaning

agent (see TABLE 7-2 on page 7-8). Allow them to dry thoroughly.

b. If disinfecting the absorber canister, continue with step 5, otherwise skip to step 7.

5. Disinfection

NOTE: Ensure that the absorber canister has been cleaned as described in step

4 before disinfecting.

Use an approved disinfecting agent (see TABLE 7-3 on page 7-9 and TABLE 7-4 on page 7-9)

for the absorber canister while adhering to facility policies and procedures.

6. Make sure that the gasket is correctly installed. The comparison between correct installation and

incorrect installation is shown below.

FIGURE 7-18 Absorber Canister, Unlocked FIGURE 7-19 Absorber Canister, Locked

Unlocked Position

Gasket

Locked Position

Gasket

Other manuals for Mindray A7

Questions and Answers:

Need help?

Do you have a question about the Mindray A7 and is the answer not in the manual?

General